| | | | Understanding the power load of IT racks has
become more and more important to ensure that they don't become
overloaded and cause unnecessary downtime. As importantly, it helps
the Data Centre Manager to distribute power effectively across the
Data Centre, which is essential in making the most of the available
power.
|  | | | | | | | In-Line Rack Meters give you the capability to
understand the power load both locally and remotely without throwing
away your current rack PDU's.The meters plug in between the power
sources (IEC commando sockets) to the rack and the rack PDU's, with
each unit able to handle 2 PDU's. The unit can be mounted into a
standard 19" rack and there are 2 visual displays of the Amps, Volts
and kWh on the front of the unit. and, if required, the meters can
be connected to a network unit, so that the information can be
viewed remotely, either by a web page or via an SNMP-enabled
application. For a
datasheet, click here | | The units come in 16A, 32A or 63A configurations
and single phase or 3 phase.
If required, the meters can be
connected to a network unit, so that the information can be viewed
remotely, either by a web page or via an SNMP-enabled application.
As an alternative if rack downtime is difficult to arrange, see the CLAmp. | | | | |
|
